home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Format CD 40
/
Amiga Format CD40 (1999-05-11)(Future Publishing)(GB)(Track 1 of 3)[!][issue 1999-06].iso
/
-seriously_amiga-
/
hardware
/
ioblixz2usr378
/
ioblixz2usr378.readme
< prev
next >
Wrap
Text File
|
1999-03-24
|
1KB
|
42 lines
Short: V37.8, IOBlixZ2 software update, 17-Mar-99
Author: tboeckel@uni-paderborn.de (Thore Boeckelmann)
Uploader: tboeckel@uni-paderborn.de (Thore Boeckelmann)
Type: hard/drivr
Replaces: IOBlixZ2Usr377.lha
List of recent changes:
ioblixser.device
37.8:
- CMD_RESET could hang forever because of waiting for wrong allocated signals.
Fixed. Thanks to Albrecht Kinzkofer for finding this bug.
- sometimes it could happen that no more data could be sent due to a bug in
the interrupt handling code. Fixed.
- now DSR signal is checked on every write to avoid hangs when no DSR signal
is available and 7-wire mode is selected. Especially Term should now quit
without problems.
ioblixpar.device
37.8:
- CMD_READ now reads data in a IEEE1284 compliant way
ioblixzip.device
37.8:
- just a revision bump
IOBlix-Handler
37.8:
- just a revision bump
SetupIOBlix
37.8:
- UARTs oscillator frequency is now calculated for every board. This makes it
possible to use an 22.1184MHz oscillator to use 230400 baud and 480600 baud.
- using the option 22MHZ skips the frequency test and forces a frequency of
22.148MHz instead of 24MHz. This option is only necessary if you changed
your boards osciallor from 24MHz to 22.1184MHz.